Command Manual - Port Isolation
Quidway S3900 Series Ethernet Switches-Release 1510
Description
Use the port isolate command to add an Ethernet port to the isolation group.
Use the undo port isolate command to remove an Ethernet port from the isolation
group.
Note:
When the port isolate command or undo port isolate command is executed, the
other ports which are in the same aggregation group with the current port in the local
unit will be added to or removed from the isolation group together at the same time.
By default, an isolation group contains no port.
Example
# Add Ethernet1/0/1 port to the isolation group.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface ethernet1/0/1
[Quidway-Ethernet1/0/1] port isolate
All aggregated ports in same unit will join isolated group together
# Remove Ethernet1/0/1 from the isolation group.
[Quidway-Ethernet1/0/1] undo port isolate
All aggregated ports in same unit will join isolated group together
Huawei Technologies Proprietary
1-2
Chapter 1 Port Isolation Configuration
Commands