Timer Realtime-Accounting - Huawei Quidway S8500 Series Command Manual

Command Manual – Security
Quidway S8500 Series Routing Switches
Parameter
minutes: The parameter ranges from 1 to 255 in minutes. By default, the primary server
waits for 5 minutes before it resumes the Active state.
Description
Use the timer quiet command to configure the time that the primary server takes to
resume the Active state.
Use the undo timer quiet command to restore the default configuration.
This command is designed to inhibit the switch from processing user request packets
for a period of time when the communication between the switch and the server is
interrupted. After the switch has waited for a period of time that is equal to or greater
than the time set by this command, it restarts sending user request packets to the
server.
Related command: display radius
Example
# Set the quiet timer of the primary server to 10 minutes.
[Quidway] radius scheme test1
[Quidway-radius-test1] timer quiet 10

2.2.27 timer realtime-accounting

Syntax
timer realtime-accounting minute
undo timer realtime-accounting
View
RADIUS scheme view
Parameter
minute: Real-time accounting interval, ranging from 3 to 60 and measured in minutes. It
must be a multiple of 3.By default, the value is 12.
Description
Use the timer realtime-accounting command to configure the real-time accounting
interval.
Use the undo timer realtime-accounting command to restore the default interval.
To implement real-time accounting, it is necessary to set a real-time accounting interval.
After the attribute is set, NAS will transmit the accounting information of online users to
the RADIUS server regularly.
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Huawei Technologies Proprietary
2-46
Configuration Commands