Ftp-Server Source-Ip; Ftp Client Configuration Commands; Ascii - Huawei Quidway S3900 series Command Manual

Command Manual – FTP and TFTP
Quidway S3900 Series Ethernet Switches-Release 1510
[Quidway] ftp-server source-interface Vlan-interface 2

1.1.8 ftp-server source-ip

Syntax
ftp-server source-ip ip-address
undo ftp-server source-ip
View
System view
Parameter
ip-address: IP address that is to be specified as the source IP address.
Description
Use the ftp-server source-ip command to specify the source IP address for an FTP
server. The value of argument ip-address must be an IP address on the device where
the configuration is performed, and otherwise a prompt appears to show the
configuration fails.
Use the undo ftp-server source-ip command to cancel the source IP address setting.
After you execute this command, the FTP server system decides which IP address on it
will be used for being accessed by FTP clients.
Example
# Specify 192.168.1.1 as the source IP address of the FTP server.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] ftp-server source-ip 192.168.1.1

1.2 FTP Client Configuration Commands

1.2.1 ascii

Syntax
ascii
View
FTP client view
Parameter
None
Huawei Technologies Proprietary
1-6
Chapter 1 FTP and TFTP