If-Match Acl - Huawei Quidway S3900 series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Description
Use the display route-policy command to display the configured Route-policy.
If you do not specify a route policy name, this command displays all route-policies
configured.
Related command: route-policy.
Example
# Display the information about Route-policy named policy1.
<Quidway> display route-policy policy1
Route-policy : policy1
Permit 10 : if-match (ip-prefix) p1
Table 4-2 Description on the fields of the display route-policy command
Field
Route-policy
Permit 10

4.1.5 if-match acl

Syntax
if-match { acl acl-number | ip-prefix ip-prefix-name }
undo if-match { acl | ip-prefix }
View
Route policy view
Parameter
acl-number: Number of the ACL used for filter
apply cost 100
matched : 0 denied : 0
Name of ip-prefix
Information about the route-policy with the mode configured as
permit and the node as 10:
if-match
if-match clause configured
(prefixlist) p1
Apply routing cost 100 to the routes matching
apply cost 100
the conditions defined by if-match clause
Number of routes matching the conditions set
matched
by if-match clause
Number of routes not matching the conditions
denied
set by if-match clause
Huawei Technologies Proprietary
4-4
Chapter 4 IP Routing Policy Configuration
Description
Commands