Peer Mesh-Group; Peer Minimum-Ttl - Huawei Quidway S3900 series Command Manual

Command Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Example
# Add the description text "router CstmrA" for the router 125.10.7.6 to specify that the
router is customer A.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] msdp
[Quidway-msdp] peer 125.10.7.6 description router CstmrA

7.1.11 peer mesh-group

Syntax
peer peer-address mesh-group name
undo peer peer-address mesh-group
View
MSDP view
Parameter
peer-address: IP address of an MSDP peer in a mesh group.
name: Name of a mesh group, case sensitive, containing 1 to 32 characters.
Description
Use the peer mesh-group command to add an MSDP peer in a mesh group.
Use the undo peer mesh-group command to cancel the configuration.
By default, an MSDP peer does not belong to any mesh group.
Example
# Configure the MSDP peer whose address is 125.10.7.6 as a member of the mesh
group Grp1.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] msdp
[Quidway-msdp] peer 125.10.7.6 mesh-group Grp1

7.1.12 peer minimum-ttl

Syntax
peer peer-address minimum-ttl ttl-value
undo peer peer-address minimum-ttl
Huawei Technologies Proprietary
7-11
Chapter 7 MSDP Configuration Commands