Display Rip Routing - Huawei Quidway S3900 series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
View
Any view
Parameter
View
Description
Use the display rip interface command to display RIP interface information.
Example
# Display RIP interface information.
<Quidway> display rip interface
Address
1.0.0.1
Table 2-2 Description on the fields of the display rip interface command
Address
Interface
Ver
MetrIn/Out
Input
Output
Split-horizon

2.1.5 display rip routing

Syntax
display rip routing
RIP Interface: public net
Interface
Vlan-interface100
Field
IP address of the interface running RIP (You need to
use the network command to enable the network
segment on which the address resides.)
Name of the interface running RIP. The IP address of
the interface corresponds to that in the Address field.
Version of RIP running on the interface
Additional routing metric added when a route is
received/sent
Indicates whether to allow the interface to receive RIP
packets ("on" means yes; "off" means no).
Indicates whether to allow the interface to send RIP
packets ("on" means yes; "off" means no).
Indicates whether split horizon is enabled ("on" means
yes; "off" means no)
Huawei Technologies Proprietary
Chapter 2 RIP Configuration Commands
Ver MetrIn/Out Input Output
2 0/1 on
Description
2-4
Split-horizon
on on