Huawei Quidway S3900 series Command Manual page 1109

Command Manual - HWPing
Quidway S3900 Series Ethernet Switches-Release 1510
Example
# Use the display hwping results command to display the test result of the test group
whose administrator name is "administrator" and operation tag is "icmp".
<Quidway> display hwping results administrator icmp
HWPing entry(admin administrator, tag icmp) test result:
Destination ip address:1.1.1.99
Send operation times: 10
Min/Max/Average Round Trip Time: 2/5/2
Square-Sum of Round Trip Time: 66
Last complete test time: 2000-4-2 7:59:54.7
Extend result:
SD Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0
System busy operation number: 0
Operation sequence errors: 0
Other operation errors: 0
Table 1-1 Description on the fields of the display hwping results command
Destination ip address
Send operation times
Receive response times
Min/Max/Average Round Trip Time
Square-Sum of Round Trip Time
Last complete test time
SD Maximal delay
DS Maximal delay
Packet lost in test
Disconnect operation number
Field
Huawei Technologies Proprietary
1-3
Chapter 1 HWPing Commands
Receive response times: 10
DS Maximal delay: 0
Operation timeout number: 0
Connection fail number: 0
Drop operation number: 0
Description
Destination IP address
Number of times the operation is sent
Number of times of the successful test
operations
Smallest/biggest/average round-trip time
The square sum of the round trip time
Time of the last successful test
Maximal delay from the source to the
destination
Maximal delay from the destination to the
source
Packet lost ratio in the test.
Number of times of disconnections by the
opposite side