Huawei Quidway S3900 series Command Manual page 673

New Feature Manual - DHCP
Quidway S3900 Series Ethernet Switches-Release 1510
dhcp server netbios-type { b-node | h-node | m-node | p-node } { interface
interface-type interface-number [ to interface-type interface-number ] | all }
undo dhcp server netbios-type { interface interface-type interface-number [ to
interface-type interface-number ] | all }
View
System view/VLAN interface view
Parameter
b-node: Specifies the broadcast type. Nodes of this type acquire host name-to-IP
address mapping by broadcasting.
p-node: Specifies the peer-to-peer type. Nodes of this type acquire host name-to-IP
address mapping by communicating with the NetBIOS server.
m-node: Specifies the m-typed mixed type. Nodes of this type are p-nodes with some
broadcasting features. (The character m here stands for mixed.)
h-node: Specifies the hybrid type. Nodes of this type are b-nodes with peer-to-peer
communicating features.
interface interface-type interface-number [ to interface-type interface-number ]:
Specifies the interface(s), through which you can specify the corresponding interface
address pools.
all: Specifies all interface address pools.
Description
Use the dhcp server netbios-type command to configure the NetBIOS node type of
the DHCP clients whose IP addresses are from the specified interface address pool(s).
Use the undo dhcp server netbios-type command to restore the default NetBIOS
node type.
By default, no NetBIOS node type is specified and the default NetBIOS node type is
h-node.
Related command: netbios-type and dhcp server nbns-list.
Example
# Enter system view.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
# Specify p-node as the NetBIOS node type of the DHCP clients whose IP addresses
are from the DHCP address pool of VLAN interface 1.
[Quidway] interface vlan-interface 1
[Quidway-Vlan-interface1] dhcp server netbios-type p-node
Huawei Technologies Proprietary
1-15
Chapter 1 DHCP Server Configuration
Commands