Hitachi Compute Blade 2000 User Manual page 70

X55A1/X55A2
X55R3/X55S3/X55R4
C D E F
G
A B J
A Power button
Press and hold this button for at least one second to turn on main power to the
server blade. If you press and hold this button for 4 seconds or more while the
OS is running, it will shut off main power to the server blade without an orderly
OS shutdown. You should avoid a forcible power cycle whenever possible.
B Reset button (RST)
Press and hold this button for one or more seconds to reset the server blade.
C Location ID LED (LID)
Lights solid blue when a server blade is identified.
D POWER LED (PWR)
Lights solid green during operation. Blinks green during sleep mode.
Lights solid orange while in standby mode.
E Error LED (ALM)
Lights solid red when an error occurs.
Lights solid red, when Watch Dog Timer (WDT) of Baseboard Management
Controller (BMC), a management microcomputer for the blade server, expires
if the ServerConductor (SC) /Agent is installed.
To set WDT (Watch Dog Timer) of the BMC, see the Guide
for Administrator of ServerConductor/BladeServer
Manager system.
K
19
I