Hitachi Compute Blade 2000 User Manual page 73

E Error LED (ALM)
Lights solid red when an error occurs.
Lights solid red, when timeout of WDT of BMC, a management microcomputer
for the server blade, is detected if SC/Agent is installed.
To set WDT of BMC, see the Guide for Administrator of
ServerConductor/BladeServer Manager system.
F Condition LED (CND)
Lights solid green to show BMC initialization.
G LAN 1/2 LED (LAN1) (LAN2)
Lights solid orange when a link to the network is established.
Blinks orange when the network is running.
H Primary LED
Lights solid green when the server blade is primary.
Blinks green when the server blade does not belong to any physical partition
or SMP between blades is being configured.
I USB port
Two USB ports.
J Serial port
Used to connect a device using a serial interface.
It is not guaranteed that every device connected to the
USB ports will work well.
22