Hitachi Compute Blade 2000 User Manual page 81

Lights solid green when online; blinks green when link is active; blinks green
at low speed when online but segmented.
Blinks green rapidly when performing diagnostics using inner loopback.
Turns off when the signal is not received.
 1 Gbps LAN pass-through module
A POWER LED (PWR)
Turns off when the power fails or no power is supplied.
B Location ID LED (LOCID)
Lights solid blue when the 1 Gbps LAN pass-through module is located.
C LAN interface connectors 0 to 15
Used for LAN cables.
Even numbers (0, 2, 4 ... 14) are assigned to the upper side connectors; odd
numbers (1, 3, 5 ... 15) to the lower side connectors.
LED on the left of a connector to show the link status lights solid green when a
link is established. Blinks green during communication.
However, when the LED on the right of a connector lights solid orange, a link
is not established either on the LAN interface or on the server blade. Thus,
communication is not available.
 10 Gbps LAN Pass Through module
A POWER LED (PWR)
Lights solid green when the power is on.
Turns off when the power fails or no power is supplied.
C
Ｄ
30
B A
E
A
B
C