Selecting Points, Lines And Areas - Leica GPS1200+ Technical Reference Manual

Geodetic satellite receiver

Hide thumbs Also See for GPS1200+:

Table of Contents

Select a point using the

softkeys step-by-step

MapView Interactive Display Feature

Selecting Points, Lines and Areas

Selecting a point, line or area in the map mode of MapView is possible using both the

softkeys and the touch screen. The functionality of all screens and field are similar for the

selecting of a point, line or area. The step-by-step instructions for selecting a point using the

softkeys can be applied for lines and areas.

Refer to "33.5.1 MapView in Map Mode" to access

MANAGE Data: Job Name, Map page.

If no point field is highlighted on the previous page when

the Map page is accessed, then any point that is selected

will be assigned to the first point field on the previous page,

the second point to the second point field, etc.

If a point field is highlighted when the Map page is

accessed then the point selected will be assigned to that

FOCUS (F2) to activate the focus tool. The focus tool is

made up of a square placed at the centre of dashed cross-

hairs. The focus tool always starts at the centre of the

screen area.