802.3 Statistics; Traffic Counters; Error Counters - Enterasys SSIM-H2-02 Installation And User Manual

•
Translational Switch received frame with RIF but, for this protocol, the noSR
flag is used during conversions. If you have the default configuration this can
happen for IPX frames (clear and set flag useSR for Novell conversion
parameters to see if this is the reason).
•
For the CRF in which the Translational Switch port exists, the ring number is
set to Auto but it is impossible to learn the proper ring number.

802.3 Statistics

From a port popup menu select TS Port Statistics | 802.3 Statistics to access this
dialog box. The dialog box displays IEEE 802.3 traffic and error counters for the
selected port. All counters are retrieved from a physical layer of the uplink and
automatically updated every 5 seconds.

Traffic Counters

Bytes Received
Number of bytes received on this port.
Bytes Transmitted
Number of bytes transmitted by this port.
Frames Received
Number of frames received on this port.
Frames Transmitted
Number of frames transmitted by this port.
Multicast Bytes Received
Number of bytes in multicast frames received on this port.
Multicast Frames Received
Number of multicast frames received on this port without errors.
Frames Transmitted, Deferred
Number of frames transmitted by this port but initially deferred. (The 21143 FE
transceiver had to defer while ready to transmit a frame because the carrier was
asserted).
SSIM-H2-02 Fast Ethernet - Translational Switch SmartStack Interface Module Installation and User Guide
51
Statistics