Show Dot1X - Enterasys Matrix 2G4072-52 Configuration Manual

14.3.5.1

show dot1x

Use this command to display 802.1X status, diagnostics, statistics, and reauthentication or
initialization control information for one or more ports.
show dot1x [auth-config | access-entity | auth-diag | auth-session-stats
auth-stats [all] [port-string] [index index-list] | [mac [all] mac [port-string]
[index index-list] | [port [init | reauth]] [port-string]]
Syntax Description
auth-config
access-entity
auth-diag
auth-session-stats (Optional) Displays authentication session statistics.
auth-stats
all
mac all mac
index index-list
port init | reauth
port-string
Command Type
Switch command.
Command Mode
Read-Only.
Command Defaults
•
•
•
(Optional) Displays authentication configuration
information.
(Optional) Displays access entity information.
(Optional) Displays authentication diagnostics information.
(Optional) Displays authentication statistics.
(Optional) Displays inactive and active authentication
entries.
Displays information for one or all MAC addresses.
(Optional) Displays information for one or more access
entities. Valid values are 0 - 8191.
(Optional) Displays the status of port initialization and
reauthentication control.
(Optional) Displays information for specific port(s). For a
detailed description of possible port-string values, refer to
Section
If no parameters are specified, 802.1X status will be displayed.
If all is not specified, only active entries will be displayed.
If index is not specified, information for all access entities will be displayed.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Security Configuration Command Set
4.1.1.
Configuring 802.1X Authentication
14-41