Set Smon Priority - Enterasys Matrix 2G4072-52 Configuration Manual

11.2.3.2

set smon priority

Use this command to create, start, or stop priority-encoded SMON user statistics counting.
set smon priority {create | enable | disable} port-string [owner]
Syntax Description
create | enable |
disable
port-string
owner
Command Defaults
If owner is not specified, none will be applied.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how set the device to gather SMON priority statistics from 1-Gigabit Ethernet
port 14 in module 3:
Matrix(rw)->set smon priority ge.3.14
Logging And Network Management Command Set
Creates, enables, or disables SMON priority statistics
counting. Create automatically enables (starts) counters.
Specifies one or more source ports on which to collect
statistics. For a detailed description of possible port-string
values, refer to
(Optional) Specifies an administratively assigned name of
the owner of this entity.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Section 4.1.1.
Configuring SMON
11-39