Table of Contents
Advertisement
This chapter describes the Policy Classification set of commands and how to use them.
For information about...
Policy Classification Configuration Summary
Configuring Policy Profiles
Configuring Classification Rules
Assigning Ports to Policy Profiles
Configuring Policy Class of Service (CoS)
Policy Classification Configuration Summary
SecureStack B3 devices support policy profile‐based provisioning of network resources by
allowing IT administrators to:
•
Create, change or remove policy profiles based on business‐specific use of network services.
•
Permit or deny access to specific services by creating and assigning classification rules which
map user profiles to protocol‐based frame filtering policies configured for a particular VLAN
or Class of Service (CoS).
•
Assign or unassign ports to policy profiles so that only ports activated for a profile will be
allowed to transmit frames accordingly.
Configuring Policy Profiles
Purpose
To review, create, change and remove user profiles that relate to business‐driven policies for
managing network resources.
Policy Classification Configuration
Note: A license is required to enable Policy on the SecureStack B2 and B3. Refer to
Licensed
Features" on page 3-26 for more information.
Note: It is recommended that you use Enterasys Networks NetSight Policy Manager as an
alternative to CLI for configuring policy classification on the SecureStack B3 devices.
10
"Activating
Refer to page...
10-1
10-1
10-5
10-14
10-16
SecureStack B3 Configuration Guide 10-1
Advertisement
Table of Contents
