Set Snmp Group - Enterasys Matrix 2G4072-52 Configuration Manual

SNMP Configuration Command Set
Configuring SNMP Users, Groups and Communities
5.3.2.5

set snmp group

Use this command to create an SNMP group. This associates SNMPv3 users to a group that shares
common access privileges.
set snmp group groupname user user security-model {v1 | v2c | usm} [volatile |
nonvolatile]
Syntax Description
groupname
user user
security-model v1 |
v2c | usm
volatile |
nonvolatile
Command Defaults
If storage type is not specified, nonvolatile storage will be applied.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to create an SNMP group called "anyone", assign a user named "public"
and assign SNMPv3 security to the group:
Matrix(rw)->set snmp group anyone user public security-model usm
5-20 Matrix DFE-Platinum and Diamond Series Configuration Guide
Specifies an SNMP group name to create.
Specifies an SNMPv3 user name to assign to the group.
Specifies an SNMP security model to assign to the group.
(Optional) Specifies a storage type for SNMP entries
associated with the group.