Clear Port Lacp - Enterasys Matrix 2G4072-52 Configuration Manual

4.5.4.14

clear port lacp

Use this command to clear link aggregation settings for one or more ports.
clear port lacp port port-string {[aadminkey] [aportpri] [asyspri]
[aadminstate {lacpactive | lacptimeout | lacpagg | lacpsync | lacpcollect |
lacpdist | lacpdef | lacpexpire | all}] [padminsyspri] [padminsysid]
[padminkey] [padminportpri] [padminport] [padminstate {lacpactive |
lacptimeout | lacpagg | lacpsync | lacpcollect | lacpdist | lacpdef | lacpexpire |
all}]}
Syntax Description
port port-string
aadminkey
aportpri
asyspri
aadminstate
lacpactive |
lacptimeout |
lacpagg | lacpsync |
lacpcollect |
lacpdist | lacpdef |
lacpexpire | all
padminsyspri
padminsysid
padminkey
padminportpri
padminport
Specifies the physical port(s) on which LACP settings
will be cleared. For a detailed description of possible
port-string values, refer to
Clears a port's actor admin key.
Clears a port's actor port priority.
Clears the port's actor system priority.
Clears a port's specific actor admin state, or all actor
admin state(s). For descriptions of specific states, refer to
the set port lacp command
Clears the port's default partner priority value.
Clears the port's default partner system ID.
Clears the port's default partner admin key.
Clears the port's default partner port priority.
Deletes a partner port from the LACP configuration.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Configuring LACP
Configuring Link Aggregation
Section 4.1.1.
(Section 4.5.4.13.)
4-119