Clear Port Mdix - Enterasys Matrix 2G4072-52 Configuration Manual

Port Configuration Command Set
Setting Auto-Negotiation and Advertised Ability
4.3.6.5

clear port mdix

Use this command to reset MDIX mode to the default setting of auto on one or more ports.
clear port mdix [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, mode will be reset for all ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset 1-Gigabit Ethernet port 14 in module 3 to auto MDI/MDIX
configuration:
Matrix(rw)->set port mdix ge.3.14
4-56 Matrix DFE-Platinum and Diamond Series Configuration Guide
(Optional) Resets mode for specific port(s). For a detailed
description of possible port-string values, refer to
Section 4.1.1.