Clear Port Counters; Show Port Counters Output Details - Enterasys C3G124-24 Configuration Manual

No counter discontinuity time
-----------------------------------------------------------------
MIB2 Interface Counters
-----------------------
In Octets
In Unicast Pkts
In Multicast Pkts
In Broadcast Pkts
In Discards
In Errors
Out Octets
Out Unicasts Pkts
Out Multicast Pkts
Out Broadcast Pkts
Out Errors
802.1Q Switch Counters
----------------------
Frames Received
Frames Transmitted
This example shows how to display all ge.3.1 port counter statistics related to traffic through the
device.
C3(su)->show port counters
Port:
802.1Q Switch Counters
-----------------------
Frames Received
Frames Transmitted
Table 11-2
Table 11-2 show port counters Output Details
Output Field
Port
MIB2 Interface
Bridge Port
MIB2 Interface
Counters
802.1Q Switch
Counters

clear port counters

Use this command to clear port counter statistics for a port or range of ports.
Syntax
clear port counters [port-string]
ge.
3.1 Bridge Port: 2
provides an explanation of the command output.
What It Displays...
Port designation. For a detailed description of possible port-string values, refer to
"Port String Syntax Used in the
MIB2 interface designation.
IEEE 802.1D bridge port designation.
MIB2 network traffic counts
Counts of frames received, transmitted, and filtered.
0
0
0
0
0
0
0
0
0
0
0
0
0
ge.
3.1 switch
0
0
CLI" on page 11-1.
clear port counters
Enterasys C3 Configuration Guide 11-5