Session - Avaya G700 Maintenance Manual

B CLI Reference for the G700 Media Gateway Processor: CLI Command Reference Pages
open between the sending equipment and the target host. Utilizes identical
command syntax and output as Cajun P330. For the VoIP the ping will return
only the statistics.
Parameters:
optional count of the number of packets to transmit. If none is specified then
5 packets will be transmitted. <mmid> is the Media Module ID; if none speci-
fied then v0 is assumed.
Sample Display
MG-001-3> ping mgp 135.9.65.213 5
PING 149.49.48.1 10: 56 databytes
64 bytes from 149.49.48.1: icmp_seq=0. time=8 ms
64 bytes from 149.49.48.1: icmp_seq=1. time=8 ms
64 bytes from 149.49.48.1: icmp_seq=2. time=8 ms
64 bytes from 149.49.48.1: icmp_seq=3. time=8 ms
64 bytes from 149.49.48.1: icmp_seq=4. time=9 ms
----149.49.48.1 PING Statistics----
5 packets transmitted, 5 packets received, 0% packet loss
round-trip (ms) min/avg/max = 8/8/9
MG-014-1(develop)# ping voip v0 127.1.1.1
----127.1.1.1 PING Statistics----
5 packets transmitted, 0 packets received, 5 packet loss
round-trip(ms) min/avg/max = 0/0/0
Administration Commands

session

Privilege:All
Description: session { mgc [sat] | icc [sat] | stack }
Provides the means to establish a session with the active MGC, SAT, or the
stack. The destination 'sat' takes the user to the SAT login. "session mgc"
takes the user to the LINUX shell login. A 'session icc" command will be added
to the MGP CLI and access the icc via the EMB. When you exit from 'session
stack' you do not return to the MGP CLI.
Note: for 'session mgc sat', and 'session icc sat' to access the Media Server
SAT terminal, the SAT port must be configured to 5023 on the Media Server. For
'session mgc' and 'session icc', the Media Server should allow access to tel-
346
<ipaddress> is the IP address of the target host. [number] is an
| Processor | CC | QOS | Network | Maintenance
Maintenance for S8300/S8700 and G700
555-234-101 — Issue 2 — October 2002
| E1/T1 CSU