Show Mgp Recovery; Show Mgp Bootimage - Avaya G700 Maintenance Manual

B CLI Reference for the G700 Media Gateway Processor: CLI Command Reference Pages
Administration Commands

show mgp recovery

Parameter:All
Description: show mgp recovery
Displays the currently configured values associated with the monitoring
actions of and recovery parameters used by the MGP.
Parameters:
Sample Display
MG-001-3> show mgp recovery
MGP RECOVERY TIMES
--------------------------------
Primary Search
Total Search
Transition Point: 1
Administration Commands

show mgp bootimage

Privilege:
Description: show mgp bootimage
Displays which flash memory bank the next boot will occur from as defined by
the set mgp bootimage { a | b } command. The currently running image source is
displayed via the 'show mg list_config' command. In contrast, this command
shows which image will become active on the next mgp boot.
Parameters:
Sample Display
MG-001-3> show mgp bootimage
FLASH MEMORY
Maintenance for S8300/S8700 and G700
555-234-101 — Issue 2 — October 2002
| Processor
None
: 2
: 30
| Processor
All
None
IMAGE VERSION
| CC | QOS | Network | Maintenance
| CC | QOS | Network | Maintenance
| E1/T1 CSU
| E1/T1 CSU
337