Issue 2 — October - Avaya G700 Maintenance Manual

A DEFINITY Server-Controlled Maintenance: Maintenance Features for Avaya G700 with S8300 Media Server
Table 123. Maintenance Features for Avaya G700 with S8300 Media Server Continued
Supported Feature
Enable/Suspend
alarm origination
Environment tests
and alarms for
S8300
ISDN loop around
connection
ISDN test call
LED tests
System
Configuration
Maintenance Object
System Link test for
PRI control link for
ISDN DS1 Media
Module
System tone test
call for G700
Terminating trunk
transmission test
lines
Test MO command
Test S8300
hardware
Test of G700
resources:
Archangel
Network Control
Element
Packet Interface
TDM clock
Tone generator
Tone detectors
Tests of Media
Modules
306
Controller
S8700/
S8300
No Not supported by S8700 platform.
Not available for S8300 in R1.
Yes
No Not available for ISDN trunks terminating on a
DS1 Media Module.
Partial Works with Media Module LEDs but not with the
G700 alarm LED.
No Not needed for Media Module board insertion.
Indicates that a board is present but that the
board does not respond to a query for board
type.
No Layer 2 of a PRI link is terminated in the G700,
so this does not apply to Avaya G700 with S8300
Media Server. A new MO is added for the status
and alarming of H.248 links.
No Requires changes to the call processing software
in the S8300 and the G700
No
Yes Support syntax of Media Module location
Limited
No Provided by G700 software in a future release.
G700 architecture specifies these resources as
G700 resources, not S8300 resources.
Partial Limited by the tests available in R1.
Notes
Maintenance for S8300/S8700 and G700
555-234-101 — Issue 2 — October 2002
2 of 3