Avaya G700 Maintenance Manual page 285

9 G700 and Media Module LEDs:
Table 99. LED Definitions Continued
No.
e
f
g
h
6
7
8
* For Giga ports, when auto-negotiation is enabled and the link is down, FC LED reflects
the last mode
If the user resets the module/stack, then all of the module's/stack's LEDs light on (test
lamp) for 150ms. The COL, Tx, and Rx LED signals must be at least 150ms.
Maintenance for S8300/S8700 and G700
555-234-101 — Issue 2 — October 2002
LED Name Description
FDX Half/Full Duplex
Port 51-66, (GREEN)
Ext 1-2
FC* Symmetric Flow
Control
Port 51-66,
Ext 1-2 (GREEN)
HSpd High Speed
Port 51-66, (GREEN)
Ext 1-2
LAG Link Aggregation
"Trunking"
Port 51-66,
Ext 1-2 (GREEN)
Data 16 data
expansion ports
51-66
(GREEN)
EXT 1 RJ 45 to Non-
Avaya equipment
(GREEN)
EXT 2 RJ 45 to Non-
Avaya equipment
(GREEN)
LED Panel for the G700
LED States
OFF - Half Duplex mode of operation
ON - Full Duplex mode of operation, or for
10/100Base-T ports when link test fail
with auto-negotiation enabled
OFF - Port is in an Asymmetric Flow
control mode, or in Flow Control mode
disabled, or it is in half duplex
ON - Port is in full duplex and in a
symmetric Flow Control mode
OFF - 10Base-T or for an expansion port
that does not exist
ON - 100Base-T, 100Base-F, 1000Base-
X, and OC-12, or for 10/100Base-T ports
when link test fail with auto-negotiation
enabled
OFF - No LAG defined with this port
ON - Port belongs to a LAG
OFF - see notes on No. 5 a-h
ON - see notes on No. 5 a-h
OFF - see notes on No. 5 a-h
ON - see notes on No. 5 a-h
OFF - see notes on No. 5 a-h
ON - see notes on No. 5 a-h
2 of 2
285