B CLI Reference for the G700 Media Gateway Processor: CLI Command Reference Pages
same level of detail as the server 'list config media-gateway' command.
Parameters:
Sample Display
Administration Commands
show mm
Privilege:
Description: show mm [<mmID>]
This command shows the MG Media Module info. It displays the type(s) and
serial numbers of Media Modules installed on the Media Gateway. Reflects the
SNMP MIB Media Module "cmgModule..." group. The faults field is an interpreta-
tion of the MM's fault mask.
Parameters:
mmID where <mmID> is the Media Module ID. Absence of specifying a mediaModID
displays all Media Modules.
326
None
|
Processor
All
<mmID> is the Media Module ID using the following convention
|
CC
|
QOS
|
Network
|
Maintenance
Maintenance for S8300/S8700 and G700
555-234-101 — Issue 2 — October 2002
|
E1/T1 CSU