Error Log Entries And Test To Clear Values; System Technician-Demanded Tests: Descriptions And Error Codes - Avaya G700 Maintenance Manual

6 Avaya MultiVantage Software-Controlled Maintenance:
Table 75. VOIP-MM (MM760 MED PRO DSP PORT)
MO Name (in
Alarm Log)
MG-VOIP
Note: You must consult local records for the location and designation of the
equipment rack where the G700 is mounted.
The MM760 Media Module provides the audio bearer channels for voice over IP calls, and is under
control of the G700. One MM760 Media Module has one VOIP-MM media processing resource.
Based on system administration of audio codecs, a VOIP-MM can handle either 64 or 32
simultaneous channels of H.323 audio processing. If the ip-parameters form specifies only G.711
mu-law or G.711 a-law as the audio codecs, the VOIP-MM can service 64 channels. If any other
codec type (G.723-5.3K, G.723-6.3K, or G.729) is administered, the VOIP-MM can only service 32
channels.

Error Log Entries and Test to Clear Values

Table 76. VOIP-MM Error Log Entries
Error
Type
0*
257(a)
Run the Short Test Sequence first. If all tests pass, run the Long Test Sequence. Refer
*
to the appropriate test description and follow the recommended procedures.
Note:
• Error Type 257 - is associated with the
System Technician-Demanded Tests:
Descriptions and Error Codes
Investigate tests in the order they are presented in the following table. By clearing error codes
associated with the
the other test in the testing sequence.
242
Alarm
Level
MINOR/WA
RNING
Aux Associated Test
Data
0 Any
65535 Control Channel
Loop Test (#52)
Control Channel Loop Test
MG-VOIP (MM760 MED PRO DSP PORT)
Initial Command to
Run *
test port GGGVS
[short/long] [repeat#] |
[clear]
Alarm On/Off
Level Board
Any Any
MINOR ON
Control Channel Loop Test (#52)
, for example, you may also clear errors generated from
Maintenance for S8300/S8700 and G700
555-234-101 — Issue 2 — October 2002
Full Name of MO
Voice Over IP
Test to Clear Value
test board GGGVSpp
test board GGGVSpp l r
2
.