6 Avaya MultiVantage Software-Controlled Maintenance:
Maintenance Objects
The maintenance subsystem is partitioned into separate entities called Maintenance Objects (MOs). A
maintenance object can be:
• An individual Media Module
• A hardware component that is part of a Media Module
• An entire subsystem
• A set of monitors
• A process (or set of processes)
• A combination of processes and hardware
"Maintenance names" are recorded in the Error and Alarm logs. Individual copies of an MO are assigned an
address that defines the MO's physical location in the system when applicable. These locations display as
the port field in the Alarm and Error logs and as output of various commands such as test board.
G700 Media Gateway MOs
The following list shows new, G700 specific maintenance objects. Other maintenance objects have
been modified slightly for G700.
• MG-ANA
• MG-ANN
• MG-DCP
• MG-DS1
• MG-ICC
• MG-LSP
• MG-MSG
• MG-VOIP
Maintenance for S8300/S8700 and G700
555-234-101 — Issue 2 — October 2002
Maintenance Objects
99