Demand Download Actions; Issue 2 — October - Avaya G700 Maintenance Manual

6 Avaya MultiVantage Software-Controlled Maintenance:
for system-level parameter, a background global update request is made to download all
programmable terminals.
This global update may take more than an hour for a system with several thousand programmable
terminals.
4 . Port Insertion
Whenever maintenance software initiates a request to place a port into service, a terminal
download action is started on that terminal if that terminal is programmable. This port insertion
action occurs under the following circumstances:
a . A digital line Media Module that is physically inserted into the system has ports currently
administered for programmable terminals.
If more than 20 port insertion requests are received within a few seconds, a global download
request is started up as a background task. This action updates all programmable terminals
instead of just those being inserted. This is done to avoid system overload for situations where
there is massive board insertion. This could occur when connectivity to an EPN is
reestablished after that EPN was down.
b . A station port is added to the system by a " add station " or " change station " command.
c . A TTI port is activated.
5 . Audits
As part of periodic maintenance, the hardware status audit test queries programmable terminals to
determine which levels and/or options are being used. If the reported values are not equal to the
administered values, the system will initiate a terminal download action. This audit does NOT
check the parameters used for softkeys.
6 . Activation of TTI
A terminal is downloaded automatically when it is activated using the Terminal Translation
Initialization feature. Therefore, no special user actions are required for TTI .
Plugging the station cord into a terminal does not automatically cause the terminal to be
downloaded. If this terminal has factory defaults or if the terminal has been previously
downloaded with parameters different than those desired, use one of the demand download
actions described below to download the terminal.

Demand Download Actions

1 . Busyout/Release Command
A maintenance demand busyout/release request for a station will cause the terminal to be
downloaded regardless of its previous download status.
2 . Feature Access Code
A Refresh Terminal Parameters Feature Access Code can be used to request a terminal download
action. When this code is followed by a "#", the programmable parameters for the current
terminal are downloaded when the terminal goes on hook. When this code is followed by an
extension, the programmable parameters for the specified station are downloaded.
148
DIG-LINE (Digital Line)
Maintenance for S8300/S8700 and G700
555-234-101 — Issue 2 — October 2002