B CLI Reference for the G700 Media Gateway Processor: CLI Command Reference Pages
Administration Commands
terminal length
Privilege:
Description: terminal length[<lines>]
Provides the means to set the terminal length expressed in the number of lines
per screen (default = 24 lines). Shows the current setting if argument is not
provided.
Parameters:
screen; (3-200, 24]), where 3-200 represents the range possible with and 24
is the default.
Sample Display
MG-001-3> terminal length 24
MG-001-3> terminal length
terminal length: 24
Administration Commands
terminal width
Privilege:All
Description: terminal width[<chars>]
Provides the means to set the terminal width expressed in the number of char-
acters (default = 80 characters). Shows the current setting if argument is
not provided.
Parameters:
(10-200, [80]), where 10-200 represents the range possible and 80 is the
default
Sample Display
MG-001-3> terminal width 80
332
|
Processor
All
<lines> represents the terminal length measured in lines per
|
Processor
<chars> represents the terminal width measured in characters.
|
CC
|
QOS
|
Network
|
Maintenance
|
CC
|
QOS
|
Network
|
Maintenance
Maintenance for S8300/S8700 and G700
555-234-101 — Issue 2 — October 2002
|
E1/T1 CSU
|
E1/T1 CSU