9 G700 and Media Module LEDs:
Table 106. ENET Link/Activity
ENET Link/Activity
Color
Power On Reset
BIOS Boot
OS and SW Boot
System Up
H.248 Registered
Shutdown in Progress
Shutdown Complete
S8300 LED Lighting Sequence
In general, S8300 LEDs light in order from top to bottom, then from left to right on the S8300
faceplate.
The following order applies during restart or boot of the S8300:
LED Lighting Sequence
1 . ALM - RED: lights up first then turns off
2 . TST - GREEN: lights up second then turns off
3 . ACT - YELLOW: lights up third then turns off
4 . OK To REMOVE - GREEN: lights up fourth then turns off
5 . LEFT LED in SERVICES jack - GREEN (100 MB link speed): lights up fifth then turns off
6 . LEFT LED in SERVICES jack - YELLOW (10 MB link speed): lights up sixth then turns off
7 . RIGHT LED in SERVICES jack - GREEN: lights up seventh then turns off
E1/T1 Media Module
The E1/T1 Media Module has a total of four LEDs. The E1/T1 Media Module has three LEDs on its
faceplate, which are under software control.
290
Green
Off
N/A
N/A
Link Status
Link Status
Unknown
Off
Table 107
shows their color and faceplate positions.
Maintenance for S8300/S8700 and G700
555-234-101 — Issue 2 — October 2002
Media Module LEDs