The Enable/Disable Announcement-Board Command; The Status Mg-Announcements Command - Avaya G700 Maintenance Manual

6 Avaya MultiVantage Software-Controlled Maintenance:
If an administered Media Module is in conflict with the inserted Media Module, then a pound sign (#)
shall be displayed to the left of the 'Module Type' field on the Media Gateway form and the
following footnote displayed "'#' indicates module type conflict".
For the listing of 'virtual' media modules, the Slots V8-V9 are listed after Slots V1-V4. The Module
Type field associated with slot V8 is an administrable field that only accepts a value of 'messaging-
analog'. The Module Type field associated with slot V9 is an administrable field that only accepts a
value of 'gateway-announcements'. The default for both is a blank field.

The enable/disable announcement-board command.

The command enable announcement-board X, where X is the module/board location, adds the specified
announcement board to the list of usable announcement boards, as defined in the software, provided there is
availability based on the allowable number of announcement boards.
The command disable announcement-board X removes the specified announcement board, whether
administered gateway-announcement boards or inserted physical boards, from the list of usable
announcement boards, as defined in the software.

The status mg-announcements command.

The status mg-announcements command displays the status of the Media Gateway announcements that
have been administered. The status indicates whether or not a Media Gateway announcement board is on
the list of usable announcement boards as defined in the software.
Figure 5. Status MG-Announcements Screen
status mg-announcements
90
MEDIA GATEWAY ANNOUNCEMENT STATUS
Gateway Number Announcements Active?
1
2
3
4
5
6
7
8
9
11
17
23
38
74
DEFINITY Server Equivalent Elements
y
y
n
y
y
n
y
y
n
y
y
n
y
y
Maintenance for S8300/S8700 and G700
555-234-101 — Issue 2 — October 2002
Page 1 of x