B CLI Reference for the G700 Media Gateway Processor: Media Gateway - E1/T1 CSU CLI Set
copy tftp
set snmp trap
show faults
show isdn bri link
show isdn link summary
show isdn pri link
show snmp
show temp
show tftp status
show voltages
test led
Media Gateway - E1/T1 CSU CLI Set
E1/T1 CSU
These commands are used to display CSU status conditions.
show csu loopbacks
show csu status
CLI Command Reference Pages
Administration Commands
clear screen
Maintenance for S8300/S8700 and G700
555-234-101 — Issue 2 — October 2002
Downloads all configuration data to RAM.
Sets up SNMP trap group reporting.
Shows active faults.
Shows the status of all MM BRI links.
Displays summary of ISDN links for MG.
Displays status of MM ISDN PRI link.
Shows all SNMP trap receivers' setup.
Shows CPU and DSP temperature.
Shows TFTP command status.
Shows power supply status.
Tests the MG's LED operation.
Shows CSU loopback status.
Shows CSU operational status.
|
Processor
|
CC
|
QOS
|
Network
|
Maintenance
|
E1/T1 CSU
313