B CLI Reference for the G700 Media Gateway Processor: CLI Command Reference Pages
MG-001-3(configure)# clear snmp trap all
MG-001-3(configure)# clear snmp trap 132.236.73.1
Administration Commands
copy mgp-config tftp
Privilege:Configure
Description: copy mgp-config tftp <filename> <ipaddress>
Permits the upload of a customer's configuration file from NVRAM to a desti-
nation via TFTP.
Parameters:
the IP address of the destination.
Sample Display
MG-001-3(configure)# copy mgp-config tftp tffs.dat 128.256.98.211
Administration Commands
copy tftp
Privilege:
Description: copy tftp { mgp-config | [mgp-image { A | B }] | [mm-image
<mmID>] } <filename> <ipaddress>
Permits the download of the MG configuration from a source to NVRAM or down-
load a firmware image from a source to flash for the Media Gateway Processor
354
|
Processor
<filename> is the name of the destination file, <ipaddress> is
|
Processor
Configure
|
CC
|
QOS
|
Network
|
Maintenance
|
CC
|
QOS
|
Network
|
Maintenance
Maintenance for S8300/S8700 and G700
555-234-101 — Issue 2 — October 2002
|
E1/T1 CSU
|
E1/T1 CSU