Replacing The S8300 Media Server - Avaya G700 Maintenance Manual

Gateway/ server or an
Hide thumbs Also See for G700:
Table of Contents

Advertisement

5 G700 Component Maintenance:
Table 35. Avaya Cajun Equipment Continued
Avaya Cajun Equipment
Material code: 108659178
Material code: 108659194
Material code: 108659186

Replacing the S8300 Media Server

The S8300 Media Server contains a Lithium/Manganese Dioxide battery.
!
CAUTION:
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.
Note: The S8300 Media Server is inserted into the G700 Slot V1 whether it is the
primary server or a local survivable backup. The S8300 Media Server can only be
inserted in Slot V1 on the left side of the G700. The LED module must be pulled
from its housing to provide clearance for the S8300 Media Server.
Replacing the S8300 Media Server in Slot V1 of the G700
Begin
1.
When removing the S8300, initiate a shutdown process by first depressing the button (for a few
seconds) located next to the fourth GREEN "Ok-to-Remove" LED (specific to the S8300). This
LED will first blink; then go steady. Once steady, this GREEN LED indicates that the disk drive
has been parked properly and is ready to be removed.
Undo the 2 captive screws.
2.
3.
Disengage the LED module and remove it from the G700.
When you insert the S8300 Media Server into its slot on the left side of the G700, you must pull
out the LED module to provide clearance for the S8300 Media Server.
Engage both sides of the S8300 Media Server module in the interior guides and guide the module
4.
halfway into the chassis.
Once the S8300 Media Server is engaged in the guides and inserted halfway into the chassis, the
LED module should be engaged in its guides, and the two units should be pushed into place
together.
Maintenance for S8300/S8700 and G700
555-234-101 — Issue 2 — October 2002
CAJUN P330 MOD EXP
GBIC 2PT
CAJUN MOD DUAL SPD
OC12/0C3 SMF 15KM
CAJUN MOD DUAL
SPEED OC12 OC3 MMF
500M
G700 Component Maintenance
The X330-G2 provides
GBIC connectivity with
an adapter for standard
GBIC transceivers.
3 of 3
73

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

S8700S8300

Table of Contents