Definitions Of Leds - Avaya G700 Maintenance Manual

9 G700 and Media Module LEDs:

Definitions of LEDs

Table 99 illustrates the LED definitions.
Table 99. LED Definitions
No.
1
2
3
4
5 a
b
c
d
284
LED Name Description
ALM Alarm Status
Color is RED
PWR Alarm Status
Color is GREEN
CPU CPU Operation
Color is GREEN
MSTR Master/Slave
Status Color is
GREEN
LNK port 51- Port Status Color
66, Ext 1-2 is GREEN
COL Collision
Port 51-66, (GREEN)
Ext 1-2
Tx Transmit to line
Port 51-66, (GREEN)
Ext 1-2
Rx Receive from line
Port 55-66, (GREEN)
Ext 1-2
LED Panel for the G700
LED States
OFF - No alarms exist
ON (RED) - Alarm exists on the chassis
itself
OFF - Power is down
ON - Power is up
Blinking - every 1.2 seconds (400ms on,
800ms off) when 5 volts power is not
available to the riser board and the Media
Modules
OFF - CPU is in boot operation or is
running BIST
ON - CPU boot operation and BIST
completed
OFF - Slave box of the stack
ON - Master of the stack and redundant
cable is not present or not active
1 Blink every 1.5 sec - Master of the stack
and active redundant cable
OFF - Port disabled or not existent. At
phase 1, or link fail of Giga ports.
ON - Port is enabled and link is OK.
1 Blink every 1.5 sec - Link test fail (of
10/100M ports only at phase 1)
2 Blinks every 1.5 sec - Partition
OFF - No collision or FDX port
ON - Collision occurred on line
OFF - No transmit activity
ON - Data transmitted on line
OFF - To receive activity
ON - Data received from the line
Maintenance for S8300/S8700 and G700
555-234-101 — Issue 2 — October 2002
1 of 2