Hardware Error Log Entries And Test To Clear Values - Avaya G700 Maintenance Manual

6 Avaya MultiVantage Software-Controlled Maintenance:
DS1 Tie Trunks are used widely in the Distributed Communications System ( DCS ) and Central
Attendant Service ( CAS ) system features.
A DS1 tie trunk can also be used as an access endpoint which is a non-signaling channel with
bandwidth for voice-grade data, 56 Kbps data or 64 Kbps data.
DS1 tie trunk maintenance provides a strategy to maintain a DS1 tie trunk via a port on the MM710
Interface Media Modules.
The DS1 tie trunk maintenance strategy covers logging DS1 tie trunk hardware errors, running tests
for trunk initialization, periodic and scheduled maintenance, system technician-demanded tests, and
alarm escalation and resolution. Three different trunk service states are specified in DS1 tie trunk
maintenance:
Out-of-service
In-service
Disconnect
(ready-for-
service)
If the DS1 Interface Media Module is out of service, then all trunks on the DS1 Interface Media
Module are also placed into the out-of-service state and a Warning alarm is raised.
Hardware Error Log Entries and Test to Clear
Values
Table 80. DS1 Tie Trunk Maintenance Error Log Entries
Error
Type
0*
1(a)
15(b)
18(c)
19(d)
130(e)
257(f)
513(g)
Maintenance for S8300/S8700 and G700
555-234-101 — Issue 2 — October 2002
The trunk is deactivated and cannot be used for
incoming or outgoing calls.
The trunk is activated and can be used for both
incoming and outgoing calls.
The trunk is in an activated state but can only be used
for an incoming call.
Aux Associated Test
Data
0 Any
57476
57477
57485
57487
Any Port Audit and
Update Test (#36)
0 busyout trunk
grp/mbr
0 None
None
57473
57474
57392 DS1 Tie Trunk
Seizure Test (#136)
TIE-DS1 (DS1 Tie Trunk)
Alarm On/Off
Level Board
Any Any
WARNING OFF
WARNING ON
MIN/MAJ
Test to Clear Value
test trunk grp/mbr
release trunk
grp/mbr *
test trunk grp/mbr
245