Set System Contact; Set System Location; Set System Name - Avaya G700 Maintenance Manual

B CLI Reference for the G700 Media Gateway Processor: CLI Command Reference Pages
Administration Commands

set system contact

Privilege:
Description: set system contact [<string>]
Permits the setting of a contact name for the system. If an empty string is
entered, the current system contact name will be erased.
Parameters:
in quotes if >= 2 words. Length =
Sample Display
MG-01-3(configure)# set system contact "Jon Smith"
Administration Commands

set system location

Privilege:All
Description: set system location [<string>]
This command is used to set the name of the site location. If an empty string
is entered, the current location name will be erased.
Parameters:
if >= 2 words. Length =
Sample Display
MG-01-3(configure)# set system location "DisneyLand"
Administration Commands

set system name

Privilege:
Description: set system name [<string>]
Permits the setting of a system name for the system. If an empty string is
324
| Processor
All
"string" defines the name of the site contact. Must be enclosed
| Processor
"string" defines the site location. Must be enclosed in quotes
1 - 20 characters.
| Processor
All
| CC | QOS | Network | Maintenance
1 - 20 characters.
| CC | QOS | Network | Maintenance
| CC | QOS | Network | Maintenance
Maintenance for S8300/S8700 and G700
555-234-101 — Issue 2 — October 2002
| E1/T1 CSU
| E1/T1 CSU
| E1/T1 CSU