Maintenance Features For Avaya G700 With S8300 Media Server - Avaya G700 Maintenance Manual

A DEFINITY Server-Controlled Maintenance: Maintenance Features for Avaya G700 with S8300 Media
Table 122. TDM Bus Tests not Executed on the G700
Test
TDM_CST_QRY
TDM_SLP_QRY
TDM_PPM_QRY
TDM_CPRUP
TDM_BD_CH
TDM_ANLY
TDM_IDLE_TS
TDM_BD_IR
TDM_CC_UPD
Maintenance Features for Avaya G700 with S8300
Media Server
Table 123 specifies maintenance features as they apply to Avaya G700 with S8300 Media Server.
Table 123. Maintenance Features for Avaya G700 with S8300 Media Server
Supported Feature
Attendant Console
alarm LED and
alarm report
acknowledgement
LED
Automatic Trunk
Measurement
System (ATMS)
DS0 Looparound
connection
DS1 CPE Loopback
DS1
Synchronization
Enable/Disable
Media Module tests
Maintenance for S8300/S8700 and G700
555-234-101 — Issue 2 — October 2002
Notes
The DEFINITY server is unaware of the TDM bus.
The DEFINITY server is unaware of the TDM bus.
The DEFINITY server is unaware of the TDM bus.
The DEFINITY server is unaware of the TDM bus.
The DEFINITY server is unaware of the TDM bus.
The DEFINITY server is unaware of the TDM bus.
The DEFINITY server is unaware of the TDM bus.
The DEFINITY server is unaware of the TDM bus.
The DEFINITY server is unaware of the TDM bus.
Controller
S8700/
S8300
Yes Status of G700 alarms is not available on the
Attendant Console with a legacy controller.
No Not available for analog trunks terminating on a
Media Module.
No
Yes Test is controlled by the DS1 Media Module.
Timing sync is local to the G700 so DS1 sync is
controlled by the G700.
Yes
Notes
305
Server
1 of 3