Show Restart Log - Avaya G700 Maintenance Manual

B CLI Reference for the G700 Media Gateway Processor: CLI Command Reference Pages
10, [1]).
Sample Display
MG-001-3(configure)# set mgp reset-times total-search 24
Administration Commands

show restart log

Privilege:
Description: show restart log
The MGP creates a log of 'reasons for restart' stored in flash mem
that is different than the trap log. The trap log might not contain a restart
entry if the logging process was trashed during an insanity cycle. This com-
mand retrieves "raw" restart data. The actual output is TBD as of this docu-
Maintenance for S8300/S8700 and G700
555-234-101 — Issue 2 — October 2002
| Processor
All
| CC | QOS | Network | Maintenance | E1/T1 CSU
335