6 Avaya MultiVantage Software-Controlled Maintenance:
Table 43. Additional Disabled SAT Commands
backup
clear
disk
interface
isdnpri-
testcall
pgate-port
Maintenance Commands
Categories of maintenance commands
• Avaya MultiVantage™ Software 1.2 SAT commands
• Avaya™ G700 Media Gateway Processor CLI commands
Since the Media Module have many of the same Maintenance Objects as the DEFINITY server circuit
packs, many of the same operations apply, as follows:
• The 'test mo logical xxx physical xxx' command works with the physical address of a Media
Module Maintenance Object.
• The 'enable/disable MO logical xxx physical xxx' commands work with the physical address of a
Media Module Maintenance Object.
• All Media Modules and their associated ports can be busied out and released from the busyout state
on demand from the SAT.
Note: A MultiVantage warning alarm and associated hardware error with error code 18
is generated when a Media Module is busied out.
• All Media Modules can be reset on demand from the SAT by use of the 'reset board' command.
!
CAUTION:
This is a destructive test so the Media Module must be busied out before a demand reset
can be done.
Maintenance for S8300/S8700 and G700
555-234-101 — Issue 2 — October 2002
duplicate
enable/disable
data-mod-
synchroniza-
ule
tion
-switch
Maintenance Commands
format
monitor
card-mem
system
(conn)
disk
recycle
carrier
97