Set Sync Source - Avaya G700 Maintenance Manual

B CLI Reference for the G700 Media Gateway Processor: CLI Command Reference Pages
furnishing the source.
Sample Display
MG-001-3(configure)# set sync interface primary v2
MG-001-3(configure)# set sync interface secondary v403
Administration Commands

set sync source

Privilege:
Description: set sync source {primary | secondary | local }
Defines the stratum clock source (E1/T1 MM, ISDN-BRI) Setting source
to primary, normal failover will occur. Setting source to secondary overrides
normal failover, gen a trap, and assert a fault. Not stored in persistent
storage.
Parameters:
Sample Display
MG-001-3(configure)# set sync source primary
MG-001-3(configure)#
If the secondary interface is not configured, the sync source set operation
will fail.
MG-001-3(configure)# set sync source secondary
Operation Failed
Cannot set the secondary clock source
to be the active clock source
Maintenance for S8300/S8700 and G700
555-234-101 — Issue 2 — October 2002
| Processor
Configure
None. 'local' is default.
| CC | QOS | Network | Maintenance | E1/T1 CSU
323