System Technician-Demanded Tests: Descriptions And Error Codes - Avaya G700 Maintenance Manual

6 Avaya MultiVantage Software-Controlled Maintenance:
• (b) Error Type 15 : this is a software audit error that does not indicate any hardware malfunction.
- Run the Short Test Sequence and investigate any associated errors.
• (c) Error Type 130 : this error type indicates that the Media Module has been removed or has
been insane for more than 11 minutes.
- To clear the error, reseat or replace the Media Module.
• (d) Error Type 257 : this is an in-line error and can only be resolved over time. This error
indicates that ringing voltage is absent.
- If not resolved over time, replace the module.
• (e) Error Type 513 :Test #48 can cause some terminal equipment to ring briefly during daily
maintenance.
- If this disturbs the customer or the terminal equipment, disable it by setting the Tests field
on the change station extension form to n . This may also disable Test #35.
System Technician-Demanded Tests:
Descriptions and Error Codes
!
CAUTION:
.
Table 52. Order of Investigation
Order of Investigation
Battery Feed Test (#35)
Station Present Test (#48)
Looparound Test (#161)
Note
: This test will abort with Error Code 1412.
Conference Test (#7)
Note
: This test will abort with Error Code 1412.
NPE Crosstalk Test (#6)
Note
: This test will abort with Error Code 1412.
Station Status and Translation Audits and
Updates Test (#36)
*D = Destructive; ND = Nondestructive
Maintenance for S8300/S8700 and G700
555-234-101 — Issue 2 — October 2002
Always investigate tests in the order presented in the table below when inspect-
ing errors in the system. By clearing error codes associated with the Battery
Feed Test, for example, you may also clear errors generated from other tests in
the testing sequence.
AN-LN-PT (Analog Line Port)
Short Test Long Test
Sequence Sequence
X X
X X
X
X
X
X X
D/ND*
ND
ND
ND
ND
ND
ND
107