Station Present Test (Also Called Ringing Application Test) (#48) - Avaya G700 Maintenance Manual

6 Avaya MultiVantage Software-Controlled Maintenance:
Table 54. TEST #36 Station Status and Translation Audits and Updates Continued
Error
Code
Any
Station Present Test (also called Ringing
Application Test) (#48)
This test applies momentary ringing voltage to the terminal equipment and monitors resulting current
flow to determine whether terminal equipment is connected to the port. This test may cause some
terminal equipment to ring briefly during daily maintenance. If this ringing disturbs the customer or
the terminal equipment, you can disable it via the Tests field on the change station extension
form. However, on some software releases, Tests #6, 7, and 35 also are disabled.
Table 55. TEST #48 Station Present Test
Error
Code
112
Test Description/ Recommendation
Result
NO The test could not relate the internal ID to the port (no board). This
BOARD result could be due to incorrect translations, no board is inserted,
an incorrect board is inserted, or an insane board is inserted.
Check to make sure that the board translations are correct. Use
the list configuration command, and resolve any problems.
If the board is correctly inserted, issue the busy board GGGVS
command.
Issue the reset board GGGVS command.
Issue the release board GGGVS command.
Issue the test board GGGVS long command. This re-establishes
the link between the internal ID and the port.
If this is not the case, check to make sure that a valid board is
inserted.
Test Description/Recommendation
Result
ABORT Necessary system resources could not be allocated to run this test.
Retry the command at 1-minute intervals no more than 5 times.
If the test continues to abort, escalate the problem.
AN-LN-PT (Analog Line Port)
Maintenance for S8300/S8700 and G700
555-234-101 — Issue 2 — October 2002
3 of 3
1 of 3