Avaya G700 Maintenance Manual page 95

6 Avaya MultiVantage Software-Controlled Maintenance:
Table 41 through Table 43
atm). Row elements with items in '()' are a third required part of the command (e.g. list configuration atm).
The columns of these table are independent of each other. These commands may or may not require an
argument. Press help for further instructions about the expected argument type.
Table 41. Disabled SAT Commands
add
atm atm
cabinet cabinet
data-module circuit-packs
fiber-link data-module
ipserver-interface fiber-link
modem-pool ipserver-interface
pgate modem-pool
paging
(loudspeaker)
pgate
synchronization
system-parameters
(ipserver-interface)
Maintenance for S8300/S8700 and G700
555-234-101 — Issue 2 — October 2002
can be read by using the column heading followed by the row element (e.g. add
change display
atm
cabinet
circuit-packs
data-module
fiber-link
ipserver-interface
modem-pool
paging
(loudspeaker)
pgate
synchronization
system-parameters
(ipserver-interface)
DEFINITY Server Equivalent Elements
remove
atm atm
cabinet cabinet
data-module configuration (atm)
fiber-link configuration (carrier)
configuration (port-
ipserver-interface
network)
modem-pool configuration (control)
pgate data-module
fiber-link
ipserver-interface
isdnpri-testcall
measurement (atm)
measurement (clan)
measurement
(modem-pool)
modem-pool
pgate
list
95