Table of Contents
Advertisement
Chapter 3: Site planning and hardware
Navigation
•
Components of SIP DECT systems
•
Deployment requirements
•
Types of SIP DECT configuration
•
Site planning
•
System deployment
Components of SIP DECT systems
This section contains information about the following topics.
•
Call Server, Signaling Server, and SIP Line Gateway
•
PC (DAP controller)
•
DECT Access Points
Call Server, Signaling Server, and SIP Line Gateway
Before you install SIP DECT, you must install and configure an Avaya Communication Server
1000 (Avaya CS 1000) system, as follows:
• Install Call Server and SIP Line Gateway.
For more information about SIP Line Gateway, see Avaya SIP Line Fundamentals,
NN43001-508.
The Avaya Communication Server 1000 CP PM Co-resident Call Server and Signaling Server
(CP PM Co-res CS and SS) can run the Call Server software, the Signaling Server software,
and the System Management software on the same hardware platform operating under the
RedHat Linux operating system.
SIP DECT Fundamentals
deployment
on page 19
on page 33
on page 40
on page 18
on page 18
on page 17
on page 28
on page 17
October 2012
17
Advertisement
Table of Contents
