Rep 3.3 Scan Input Idler Roller; Rep 3.4 Platen Roller - Xerox Telecopier 7017 Technical Reference Manual

REP 3.3 Scan Input Idler Roller

Parts List on PL 3.2
Removal
1. Remove power cord.
2. Remove document catch tray assembly
(REP 1.1).
3. Remove control panel assembly (REP 5.1).
4. Remove upper scan cover (REP 1.7).
5. Remove scan input idler roller.
a. Remove scan sensor bracket from
scan input idler roller.
b. Remove E-ring securing platen pulley
on scan input idler roller shaft.
c. Remove platen pulley and platen
belt.
d. Remove two scan idler springs from
scan input idler roller.
e. Remove two upper scan bearings
from scan input idler roller.
f. Remove scan input idler roller.
Replacement
Reinstall in reverse order.
Telecopier 7017 / 7017SF

REP 3.4 Platen Roller

Parts List on PL 3.2
Removal
1. Remove power cord.
2. Remove document catch tray assembly
(REP 1.1).
3. Remove control panel assembly (REP 5.1).
4. Remove upper scan cover (REP 1.7).
5. Remove platen roller. (Figure 1)
a. Remove E-ring securing
spacer.
b. Remove platen spacer.
c. Remove platen belt.
d. Remove platen pulley from platen
roller.
e. Remove the two platen springs.
f. Remove upper scan bearing from
platen roller.
g. Remove RH platen bearing.
h. Remove platen roller.
12/88
4-17
www.printcopy.info
platen
Replacement
Reinstall in reverse order.
REP 3.3, 3.4