Fuel Filter Replacement - Honda 2004 Odyssey Service Manual

Fuel Filter Replacement

The fuel filter should be replaced whenever the fuel
pressure drops below the specified value
(see page 11-216) after making sure that the fuel pump
and the fuel pressure regulator are OK.
1. Remove the fuel tank unit, '99-00 models
(see page 11-231), '01-04 models (see page
11-232).
2. Remove the fuel filter (A).
B
D
3. Check these items before installing the fuel tank
unit:
• When connecting the wire harness, make sure
the connection is secure and the terminal (B) is
firmly locked into place.
• Do not push the lower part of the suction filter (C).
• When installing the fuel gauge sending unit (D),
make sure the connection is secure and the
connector is firmly locked into place. Be careful
not to bend or twist it excessively.
4. Install the parts in the reverse order of removal
A
B
B
C
E
with a new base gasket (E). When installing the fuel
tank unit, align the marks on the unit and the fuel
tank (see page 11-230).
NOTE: Place the new base gasket for the fuel tank
unit on the tank first, then carefully insert the fuel
tank unit. If the fuel tank unit is incorrectly installed,
the MIL can come on with DTC P1456.
11-229