EGR System
DTC Troubleshooting (cont'd)
30. Disconnect the jumper wire from the EGR valve 6P
connector.
31. Check for continuity between EGR valve 6P
connector terminal No. 6 and body ground.
EGR VALVE 6P CONNECTOR
Wire side of female terminals
Is there continuity?
YES
Substitute a known-good PCM and recheck
(see page 11-5). If the symptom/indication goes
away, replace the original PCM.
NO
Repair open in the wire between the EGR
valve and G101.
11-254
GND (BLK)