Throttle Cable Adjustment - Honda 2004 Odyssey Service Manual

Intake Air System

Throttle Cable Adjustment

1. Hold the throttle link (A) to the throttle lever (B).
There should be no clearance.
B
2. Check cable free play at the throttle linkage. Cable
free play (A) should be 10 12 mm (3/8 1/2 in.).
3. If free play is not within specs (10 12 mm, 3/8 1/2
in.), loosen the locknut (B), turn the adjusting nut
(C) until the free play is as specified, then retighten
the locknut.
4. With the cable properly adjusted, check the throttle
valve to be sure it opens fully when you push the
accelerator pedal to the floor. Also check the
throttle valve to be sure it returns to the idle
position whenever you release the accelerator
pedal.
11-242
A
A B
C