Floppy Disk Cannot Be Read Or Written Onto; Time And/Or Date Are Incorrect; System Fails To Boot - Fujitsu Siemens Computers PRIMERGY TX150 Operating Manual

Floppy Disk Cannot be Read or Written onto

Mouse controller disabled
The mouse controller on the system board must be enabled if you use the
supplied mouse.
Ê Check in the BIOS Setup that the mouse controller is Enabled.
7.7 Floppy Disk Cannot be Read or Written onto
Ê Check whether the write protection of the floppy disk is enabled.
Ê Check the entry for the floppy disk drive in the BIOS Setup.
Ê Check in the BIOS-Setup whether the floppy disk drive controller and write
permission are enabled (see technical manual for system board at the
PRIMERGY ServerBooks-CD).
7.8

Time and/or Date are Incorrect

Ê Set the time and/or date in the operating system or in the BIOS-Setup.
I
If the time and date are repeatedly wrong when you switch on your
server, you must change the lithium battery. Contact our Service group.
7.9

System Fails to Boot

The system fails to boot after installing a new hard disk drive.
SCSI configuration incorrect (Ultra Wide SCSI Controller)
Ê In the SCSI configuration menu check the settings for the hard disk drives
(SCSI Device Configuration) and the settings under Advanced Configuration
Options.
70
Problem Solutions and Tips
A26361-K879-Z102-3-7619